Epoxy Zinc Rich Prime

We offer Epoxy Zinc Rich Primer with Zinc Dust to our valuable client. The Zinc pigment in dry film provides an excellent protection to steel surface, tanks, pipelines and plant components in both interior and exterior exposed conditions. It also provides cathodic protection to steel and gives good resistance to undercoating of damaged areas. It can be over coated with wide range of top coats.

Technical Data:

• Composition: Epoxy Resin Pigmented with Zinc Dust
• "">Finish: Matt
• Mixing Ration: 4:1 bt Volume
• Recommended DFT: 25-30 microns
• Zinc Dust Content on DFT90+2%
• Theoretical Coverage: 13 to 15 sq. met. at a recommended DFT
• Application: Airless spray or brush
• Pot Life: 4 to 6 hours at 30 C
• Shelf Life: 12 months (of individual components)
• Drying: Surface Dry : 10-15 minutes, Hard Dry : 1 to 2 hours, Full cure : 7 Days
• Over coating Interval: overnight
• Maturation Time On Mixing: 10-15 mins
• Spraying Viscosity: 20+2"/FC-4 at 30 C
• Temperature Resistance: 300 C dry heat
• Flash Point: Above 25 C
• Compatibility: Tack-free : Can be over coated with all type of paints